Changzhou Meditech Trading Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. Zeng David
  • Company Name : Changzhou Meditech Trading Co., Ltd.
  • Tel : 86-519-85855955
  • Fax : 86-519-85855955
  • Address : Jiangsu,Changzhou,Room 527, Building2, Fuhan Garden, Xinbei District
  • Country/Region : China
  • Zip : 213022

Wire, Cable, Pipe, on-line measurement Laser Diameter Gauge (Model LDM-50)

Wire, Cable, Pipe, on-line measurement Laser Diameter Gauge (Model LDM-50)
Product Detailed
1. Laser diameter gauge 2. accuracy: 0.001 3. Measurement & control 4. Can be used with PLC 5. Range: 0.2-50mm

Cable, Pipe, on-line measurement Laser Diameter Gauge is the high-accuracy installment that uses the laser scan to carry on the no-contacts on-line measurement. It is mainly used in measuring of outer diameter and adjusting the extruder screw or traction speed, to control the outside diameter. It is applicable to measure and control the diameter of metal wires, glass, pipes, wire and cable, etc.

It can also be applied to the outer diameter of workpiece and size measurements.

1.  Technical parameters

 Model   Measruing Range  Resolution   Accuracy
LDM250.1-20mm0.001±0.02%×(Reading)±0.001mm
LDM500.2-45mm0.001±0.02%×(Reading)±0.002mm

2.  The performance indicatorsMeasurement: Laser scanningLaser: Visible red semiconductor laserLaser output power: <2mWOperating voltage: ~ 220V ± 15%    50 - 60HzOperating temperature: -10 ~ 40 °CHumidity: <85% RHWork mode: continuousPower consumption: <30WExternal dimensions:Dimensions: LDM-25/LDM-50 Measuring head: 461mm×80mm×200mm

3.  Characteristicsi. Can be connected PLC, industrial computer.ii. RROFIBUS-DP can be allocated and MODBUS converter and PLC, IPC Connect.iii. Can be equipped remote controller DDC-5, on the extruder and automatic feedback control to control the tolerance, improve product quality, reducing consumption.

4.  Display Controller (Model:DDC-5)

i. It be used to display and control.ii. Applicable to DC motors, VVVF motor.iii.The controller can control the speed of extruder or the tractor according to the diameter tolerance.Signal distance: More than 500mOutput voltage: ±10VWith RS485 It can connect to PLC industry controlling computer The PROFIBUS-DP or MODBUSCan be selected.External dimensions: 100mm×100mm×120mm (Model:DDC-5)Installation hole size: 90mm×90mm (Model:DDC-5)

                                           Laser Diameter gauge (with Stand)

Stand size 350mm×200mm×(700-1000)mmCenter high of the measuring position is 900 -1200mmStand height can be adjusted

Wire, Cable, Pipe, on-line measurement Laser Diameter Gauge (Model LDM-50)



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.